Martex Coating: The Ideal Anti-Slip Solution for Your Outdoor Spaces in Montreal

Martex is a non-slip exterior coating made of acrylic and quartz . Applied in multiple layers, it is ideal for surfaces such as balconies , stairs , patios/terraces , and pool surrounds . This coating improves traction, appearance, and surface protection. It is particularly useful in Montreal's climate, where rain and freeze/thaw cycles are frequent.

Who is it ideal for?

The Martex is perfect for:

• Balconies or stairs that are slippery or worn .

• Concrete surfaces that require a clean and uniform finish.

• High-risk areas include steps, entrances, and pool surrounds.

• Residential projects where you want a safe and lasting result.

  
  

Typical Duration of Works

The work often takes 2 to 3 days , but this depends on the surface area, preparation, and weather conditions.

How much does Martex coating cost in Montreal?

The price of a Martex coating varies depending on several factors:

• The area (ft²) .

• The condition of the substrate (concrete).

• The required preparation (repairs, cleaning, adhesion).

• Access and details (steps, curbs, slopes).

  
  

Indicative Price Ranges

• Minimum project budget: $2,500 to $3,500

• Average price: $18 to $36 / sq ft

• Standard balcony: $2,500 to $3,500

• Stairs (treads + risers): $3,500 to $4,200

• Patio/terrace: $2,500 to $4,200

• Pool surround: $4,500 to $7,900

  
  

What Affects the Price

Several factors can influence the price:

• Concrete repairs (cracks, chips, friable areas).

• The removal or stripping of an old coating (paint, epoxy, Martex).

• Difficult access, height and protection of areas.

• The details: stair nosing, edges, transitions, slopes and drainage.

  
  

Why Choose Lavé-Uni Montréal for a Martex?

Choosing Lavé-Uni Montréal means opting for:

• Special attention should be paid to the preparation of the substrate . This is a key element to ensure the durability of the coating.

• A structured application, with clear steps and rigorous quality control.

• Honest recommendations. If the support or drainage is inadequate, we point it out and correct it before proceeding.

  
  

How is a Martex coating applied?

Applying a Martex coating involves several steps:

1. Inspection & diagnosis : Assessment of the support, cracks, slopes and weak areas.

2. Site protection : Protection of walls, doors, railings and vegetation.

3. Deep cleaning : Decontamination and preparation for adhesion.

4. Repairs : Treatment of cracks, chips and localized corrections.

5. Preparation of details : Finishing of stair nosings, joints and transitions.

6. Adhesion layer / primer : Applied if necessary depending on the substrate.

7. Application of Martex coatings : Acrylic and quartz mixture.

8. Non-slip finish : Texture suitable for balconies, stairs or swimming pools.

9. Quality control : Verification of uniformity, critical areas and finishes.

10. Treatment & instructions : Time before circulation and maintenance advice.

In What Cases Is Martex Not the Best Option?

Martex is not recommended in the following situations:

• Unstable support (crumbling concrete or structural problem).

• Stagnant water due to an uncorrected slope or problematic drainage.

• Unsuitable weather conditions at the time of the work.

  
  

In these cases, we first propose correction (repair/drainage), then coating.

Recommended Maintenance

To ensure the longevity of your coating, here are our maintenance tips:

• Perform a gentle cleaning, avoiding overly aggressive products.

• Inspect high-traffic areas annually (steps, thresholds).

• In winter, limit the use of aggressive abrasives and follow our maintenance instructions.

  
  

FAQ — Martex coating (acrylic + quartz)

What exactly is Martex?

It is an exterior coating made of acrylic + quartz , applied in layers, designed to improve adhesion and finish.

Is it non-slip?

Yes. The quartz texture increases grip, especially on steps and in wet areas.

On what surfaces can it be applied?

Primarily on concrete (and some compatible surfaces), after inspection and preparation.

How much does it cost in Montreal?

On average, the cost is $18 to $36/sq ft , with a minimum project cost of $2,500 to $3,500 .

How long will the work take?

Generally, the work takes 2 to 3 days , depending on the surface area, preparation and weather.

Is it suitable for the freeze/thaw cycle in Montreal?

Yes, as long as the surface is sound and the preparation and application comply with the correct conditions.

Does it hide the cracks?

This improves the appearance, but active cracks must be repaired, otherwise they may reappear.

Can it be applied over an old coating?

Sometimes. If the adhesion is poor, it is often necessary to strip/remove and start again on a solid base.

Is this suitable for stairs?

Yes, it's one of the best applications for achieving a safer and more uniform surface.

What is the price for stairs?

Typically, the cost is $3,500 to $4,200 (steps + risers), depending on preparation and complexity.

Is this recommended for a pool surround?

Yes, it's very common. The typical budget is $4,500 to $7,900 , depending on the size, details, and preparation.

Does it correct the slope or the drainage?

No. If the water stagnates, the slope/drainage must be corrected beforehand to avoid problems.

When can we walk on it?

After a curing period, we will give you a clear timeframe depending on the weather and the layers applied.

What type of maintenance is recommended?

Gentle cleaning and an annual inspection are recommended. We provide instructions tailored to your specific use (balcony, steps, pool).

Do you offer a guarantee?

Yes, we offer a 5 to 10 year warranty. We clearly explain what is covered after inspection of the support.

By choosing Lavé-Uni Montréal, you're choosing quality service to transform and preserve your outdoor spaces. Our certified expertise guarantees your satisfaction.